Будинок> Блог> Principle of variable intake system

Principle of variable intake system

November 21, 2022

Principle of variable intake system

◆ When the engine speed is low, the intake flow rate is relatively low, which is not conducive to ensuring the best gas distribution at low speed. If the length of the intake pipe can be shortened, the intake velocity can be increased, thereby controlling the intake flow rate within a reasonable range.

The specific method is to close or open some valves in the intake duct, so that the airflow can take a shortcut or go around far to achieve the purpose of changing the length of the intake pipe.

◆ For example, when the engine is running at a low speed of 2000r/min, the black control valve is closed, and the airflow is forced to flow into the cylinder from the long manifold. At this time, the natural frequency of the intake manifold is reduced to adapt to the low speed airflow. When the engine speed rises to a certain level, such as 5000r/min, the control valve is opened at this time, and the airflow bypasses the lower conduit and directly injects into the cylinder, which is more conducive to high-speed air intake.

◆ The V12 engine assembled by BMW uses another design with continuously variable intake pipe length. It designs a rotor in the middle of the intake mechanism to control the length of the intake manifold. Through the change of the rotor angle, the length of the intake air flow entering the cylinder is continuously variable. This can better meet the intake efficiency requirements at various speeds, and improve power output and fuel economy.

Зв'яжіться з нами

Author:

Ms. Sandy

Phone/WhatsApp:

+8613957758906

Популярні продукти
Новини промисловості
Vvt-i

November 21, 2022

You may also like
Related Categories

Надішліть листа цьому постачальником

Тема:
Електронна пошта:
повідомлення:

Your message must be betwwen 20-8000 characters

Зв'яжіться з нами

Author:

Ms. Sandy

Phone/WhatsApp:

+8613957758906

Популярні продукти
Новини промисловості
Vvt-i

November 21, 2022

Зв'язатися

  • Тел: +86-577-89992597
  • Whatsapp: +8613957758906
  • Електронна пошта: autoocv.sandy@aliyun.com
  • Адреса: No. 488 Binhai 14th Road, Wenzhou Economic and Technological Development Zone, Wenzhou, Zhejiang China

Надіслати запит

Ми зв’яжемось з вами негайно

Заповніть додаткову інформацію, щоб швидше зв’язатися з вами швидше

Заява про конфіденційність: Ваша конфіденційність для нас дуже важлива. Наша компанія обіцяє не розголошувати свою особисту інформацію будь -якій перевищенні, не вистачаючи ваших явних дозволів.

Відправити